Geogrids, geotextiles and geocomposites for ground stabilization, roads and railway stabilization, superficial structural foundations.

Soil stabilization applications:
Paved and unpaved roads stabilization

Railroads and airport runways

Permanent and semi-permanent loads spread over large areas

Superficial structural foundations

Foundation of road-beds, embankments and earth dams

MS GEOGRIDS

Manufactured by combining up to 5 layers of geogrids: the number of strands allows for a very uniform distribution of stress conditions.

LBO SAMP GEOGRID

TENAX LBO SAMP geogrids for soil stabilization reinforcement. Interlocking of the aggregate within the apertures allows for the confinement of the soil.

GT GEOCOMPOSITE

TENAX GT is a geocomposite for soil stabilization where a reinforcing action and the separation between a granular base and very fine soil are required.

Geogrids for soil reinforcement, landslides stabilization, railway and road embankments, construction of retaining walls.

Soil reinforcement applications:

Stabilization of landslides

Construction of retaining walls

Slope crest enlargement

Vegetated sound deadening barriers

Construction of road and railway embankments

TENAX solutions for railways

Containment embankments and reinforcement for waste landfill

Embankment for rock fall protection

TT SAMP GEOGRIDS

TENAX TT SAMP geogrids are produced for the reinforcement of soil. Soil and aggregate interlock within the geogrid openings, which, confine the soil and limit its relative displacements and increase the soil’s shear stress resistance.

RIVEL GEOGRID SYSTEM

The reinforcing element provided by the TENAX RIVEL System is composed of a TENAX TT SAMP geogrid and on the face by a non structural guiding and supporting "left in place" formwork.

T-BLOCK RETAINING WALL SYSTEM

The System features a modular precast concrete block facing unit, a polymeric T-Clip connector and layers of TENAX TT SAMP geogrid reinforcement material.

Geonets, geomats and geogrids for erosion control applications, canal banks, artificial ponds and landfills.

Erosion control applications:

Slopes with arid and rocky matrix

Slopes with vegetative matrix

Banks for earthen canals and waterways

Impermeable banks for canals and ponds

Landfill capping

MULTIMAT R GEOMAT

Designed for the protection and planting of slopes subjected to surface erosion whenever a suitable vegetative substrate soil already exists.

TENWEB GEOCELL

The cellular structure is therefore particularly useful on arid, rocky or impermeable soils where vegetation is almost or totally lacking.