Contact
Home > Geosynthetics > Drainage > Roadways

One of the major causes of pavement failure is water within the pavement. To prevent pavement failure, the engineer needs to give due consideration for adequate drainage during the design. Another drainage issue is damage caused by frost heave and subsequent thaw. Among the damange caused by frost heave is the cost of repair and maintenance, possible restrictions on vehicle weight, and even complete closure of roadways.

Roadrain is the solution to problems associated with roadway drainage. By providing excellent drainage, Roadrain greatly extends the life of the roads and reduces maintenance costs. Plus, Roadrain is easy to install and readily available. It's engineered solution to improve drainage and/or reduce frost heave potential incorporates a compressive resistant, void-maintaining system in the pavement structure. Roadrain has great compressive stiffness to support traffic, rapid fluid transmission characteristics equivalent to a free-draining base, significant air void to provide a capillary break, and high tensile strength allowing for increased reinforcement and subgrade restraint.

                     
   Roadrain
Roadrain provides exceptional roadway drainage and reduces frost heave potential, which in turn extends the life of the road and reduces maintenance cost.
                     

 Design Tools - Geosynthetics

roadwaydesign.com


 Case History - Geosynthetics

Maine Department of Transportation - Tendrain for Roadway Drainage
Southwest Parkway Street Reconstruction, TX
Highway 35 Road Reconstruction at Bridge Abutment, MN
Caltrans Highway 20, CA
Northbound Lane of Highway 63, MO
US Route 1, MN
Bodega Highway, CA
Dunaweal Lane, CA
Tri-Axial Geocomposite Under a Concrete Sidewalk


 Literature - Geosynthetics

Brochure - Civil Engineering Solutions
Folder - Tenax Roadrain for Subsurface Drainage Layer
Technical Note - Specifying the Applied Pressure in Transmissivity Testing


TENAX Corporation
4800 East Monument Street, Baltimore, Maryland 21205, USA
(p) 410-522-7000 • (t) 800-356-8495 • (f) 410-522-7015 •
sales@tenax.com www.tenax.com

© 2006 TENAX Group, All Rights Reserved